New Garadry adhesive and sealant has been specifically engineered by us to be the all-in-one complete solution for adhering and sealing all of our garage door threshold seals. Garadry black adhesive & sealant is an all-round, highly durable and permanently flexible adhesive and sealant that has excellent adhesion to non-porous surfaces.
It will also bond to damp surfaces, and is paintable (with most paints). The sealant is odourless and free of isocyanates (highly reactive chemicals). Garadry sealant has a shelf life (in tube, not applied) of 18 months.
The recommended application temperature for this product is between 40oF and 95oF. Below 40oF the adhesive can become difficult to work with and apply correctly. Above 95oF the product may begin to cure prematurely or discolor.
We recommend keeping the adhesive / sealant at room temperature until it is needed, to make it as easy to use as possible.
Our new Garadry adhesive & sealant has been specifically designed for both effectively securing and weather sealing our garage door threshold seals and benefits from:
- 20% increased surface grab against our previous adhesive & sealant
- Increased durability and flexibility vs traditional sealants
- Longer shelf life vs our previous adhesive & sealant
- Specifically engineered for maximum performance with our entire threshold seal range.
Cartridge size : 290ml
Safety data sheet available here
Preparing the floor before laying the adhesive
Our adhesive & sealant has been designed and tested to stick to sealed concrete floors. The surface should be cleaned of all dust, dirt, oil and grease before application. Where painted, we recommend using a wire brush to remove any loose paint from the floor. We also recommend using a concrete or block paving sealer to seal the concrete prior to use.
Time to dry
The time for the adhesive to cure is affected by many factors, such as the application temperature, humidity, etc. We recommend to leave the adhesive to dry overnight prior to driving any vehicles over the floor threshold. This will help to ensure maximum bond with the surface.