Recently added item(s) ×
You have no items in your basket.
* Required Fields
The Garadry (0.59" High) garage door threshold seal kit has been designed to form a watertight seal between the garage door and the floor. The threshold will also prevent leaves, dust and debris from being blown under the garage door, thus ensuring a clean and dry environment.
The kit includes:
Suitable to fit with a manual or automatic up and over, side hinged, roller and sectional garage doors.
Surface must be clean and free from dust, oil or grease. Fitting Garadry floor seal on loose concrete or gravel floor is not recommended. Where the surface is painted a wire brush should be used on the area where the floor seal will be fitted.
Tape measure Hacksaw or sharp scissors Pencil Ruler Sealant gun
There are eight available lengths (7’3”, 8’3”, 10’3”, 12’3”, 14’3”, 16’3”, 18’3”and 20’3”)
The raised hump on the top of the threshold fits behind the garage door to ensure that a tight seal is formed when the garage door is in the closed position.
Yes, the threshold is secured to the floor by a very strong sealant. The threshold has also been tested rigorously to ensure that it stays in place when being driven over.
Our threshold seals can handle extreme temperatures without any issue. Our specialist sealant/adhesive does become slightly harder to apply in lower temperatures but once installed it will work just fine. If you can, install the threshold above freezing to ensure you get the best seal.
Yes. The threshold should take no longer than 20 minutes to fit. It requires only one adult for fitting and comes with easy-to-follow written fitting instructions. A video showing step-by-step fitting instructions is also available online. Click the fitting instructions tab to watch the video now.
If you have a very uneven garage floor you may either apply extra sealant to any hollow areas so that the threshold is fitted on an even surface or you may purchase our 0.98" high ramp design threshold which has been designed specifically for uneven garage floors. *Please note however that this threshold will only work for gaps of 0.98" or less. Alternatively, please contact us for more information/guidance about fitting a threshold on an uneven surface and one of our team will be happy to help you.
It is recommended that you allow a minimum of 24 hours before stepping on/driving over the threshold to ensure maximum bonding to the floor.
We have designed the threshold to be extremely durable. It is made from a thermoplastic material which is both robust and durable. We also provide a five-year guarantee with the threshold for your peace of mind (T&C's apply).
The threshold has been designed with safety in mind. The bright yellow warning line provides a visual reminder to those stepping into/out of the garage and is designed to prevent trips and falls.
Click here for delivery prices and timeframes.
Click here for returns information.
See the last seven reviews of our customers.
After a few days of your order, you will receive an e-Mail which asks you for your personal feedback.
Garage Door Threshold Seal Kit (0.98" High)
Garage Door Seal Coil (0.59" High)
Commercial Door Aluminum Threshold Seal Kit (0.59" High)
Garage Door Threshold Seal Kit (0.98" High) Ramp Design
Garage Door Threshold Seal Kit (0.78" High)
Garage Door Flood Barrier Threshold Kit (1.57" High)
Garage Door Threshold Seal Kit (1.18" High)